Wolfgang Finishing Glaze 3.0
I did the same sections above with the same machines but this time around with the Finishing Glaze on a 6.5” Lake Country CCS finishing pad. I was expecting this product to lightly polish and clean the paint, and add some gloss and or protection like typical glazes – not the case, this is purely a final polish. I don’t have anything to say about application or removal, everything worked nicely. I still prefer to use the rotary than UDM but the UDM was fairly effective (moreso than TSR3.0). What really surprised me was the amount of correction done by the Finishing Glaze with a
finishing pad. I did not polish the front lip of the hood, which left me a perfect spot for 50/50 shots of the correctional abilities of this product.
I sectioned off the hood to see if I could tell any differences (which I did not except on the front lip):
Here is the FG3.0 on the UDM:
After the UDM and finishing pad 50/50:
After the rotary and finishing pad 50/50:
And the rest are pictures from the rotary side (which impressed me the most)
Again, the results are hard to see because the paint on the hood is terrible. Most of the damage that is left will remain until a repaint. It's strange that the rest of the vehicle is decent yet the hood is junk. Also, these are simply my initial feelings about the products, not long term assessments. These products are new to the market and I figured any info given would be better than none at all. This was my first time using them and you may have different experiences. I used these in my garage where it was about 45-50 degrees, if that helps anyone. Let me know if you have any questions or comments.