These polishes were designed to work with high speed rotary polisher’s, utilizing friction to break-down the diminishing abrasives, while in the controlled temperature / humidity environment (working temp range 60 – 800F (15-260C) of a vehicle manufacturer’s paint shop finishing line.
Oil cannot hide defects, but it can actually enhance them, Menzerna uses an oil in water emulsion for lubrication (white mineral oil and glycerine) as a medium to suspend the abrasives in and to reduce the heat generated from polishing; evenly spread the polish at a low rpm over the whole panel until the oils spread.
Ensure a uniform even coat, so when you do work the polish in at higher speeds, the abrasives and oil lubrication work in tandem, if you are using a polymer after polishing it will be necessary to wipe-down the paint surface with Menzerna Top inspection, DuPont® Prep-Sol® 3919S™ is a slow evaporating cleaning solvent, but do not allow to dry on paint surface or Isopropyl alcohol (IPA) A surface wipe-down is considered good practice after polishing
|