This detail was designed to be a Minor Correction detail, removing ~ 65% of the swirls.
Wash Procedure:
Z-7 Foam Wash, Two Buckets w/ Grit Guards
Rinsed w/ Filtered Water
Dried w/ Waffle Weave Towels
Clay:
Meg's Profesional Mild
Meg's Last Touch
Interior:
Vacuumed
Woolite (8:1)
Z-10 on Leather
1Z Cockpit on other surfaces
Boars Hair brushes in Vents
Other:
303 On Tires
303 In Wheel Wells
Minor Correction:
Menzerna 106FF/Menzerna 106FA
(Although I love FA, the extra oils were more difficult to remove)
CG White Pad (identical to old SONUS, and my favorite pads)
3m backing plate
Menzerna Wipe-Down
Equipment:
Defelsko Positest DFT Combo
Brinkman
EZ-Detail Brush
Swissvax Wheel Brush
Various Boars-Hair Brushes for vents, crevices etc
Loads of MF towels
Zymol Pre-Wax Applicators (used to apply J.S.)
Sealant of Choice:
CG Jetseal109
LSP of Choice:
Swissvax Concorso (applied w/ Zymol Wax Applicator... they're thicker than SV's)
No Washing or Claying shots. I'll just skip over to the PTG readings! Everything OK!
Now on to the swirls! 106FF/106FA worked great, but a few RIDS still remain...
Before
After
Before
After
Before
After
More Polishing...
Polishing the Clear Bra
Rear Door Before
Rear Door During
Rear Door After
Interior
106FA was smearing... so out with a wipe-down to remove the oils!
Re-Wash with Z7 in the Foam Gun
JetSeal
Choices, Choices... Lusso, Glasur, P21S 100%....
Concorso it is!!
A good friend of mine removing the wax after 10 minutes
And the afters....
Swissvax Quick Finish
Thanks for Looking !