The backing plates do indeed use an M14 thread, where as you US and Canadian guys will probably have a 5/8" thread on your machines.
The ultra soft backing plate is very similar to a 3M plate, except it has a softer layer of foam.
But they are quite light so shipping on them wouldn't be outrageous, about £2 (GBP) on a single one. So about $33 (USD) for a single plate with shipping.
Not sure how you would get over the M14 thread issue though.
Last edited by Rubbish Boy; 06-24-2008 at 04:25 AM.
|