 |
 |
| Polishing Preparation is one of the most important steps to achieve a flawless finish, if you have any questions about how to properly polish a vehicle or would like to share tips on how to polish post here. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-17-2008, 04:34 PM
|
||||
|
||||
Duragloss 652 and 671?
I am a big fan of every Duragloss product I have tried (except their paste wax) and was wondering if anyone has any experience with DG 652 or 671, DG's polish/swirl remover?
I am getting ready to place an order for some more 501 and Track CLaw sealant and thought I might add these two products to the order. Duragloss Duragloss PC-No.2 (Buffing & Polishing Cleaner) Duragloss Duragloss SMR (Swirl Mark Remover) Last edited by Strokin04; 06-17-2008 at 04:55 PM. 
|
|
06-18-2008, 06:01 AM
|
||||
|
||||
|
OK....they are both like a finishing polish ...no real corrections ..
PC-2 will take out minor swirls..like lite marring at most..but it will boost surface gloss...it contains micro abrasives....think of it like a finishing polish....it will also cut oxidation due to chemical abrasion...does leave a nice gloss after... SMR..is more of a hologram remover ..takes out buffer trails...now this product is also used like a glaze....it will take out lite swirl but fill what can not be removed...used as a galze it does last a while...its a polymer/resin glaze so it out lasts any oil type glazes...its like a SMR/glaze/semi sealant..... it leaves a nice high gloss finish... I use both on motorcycles and Honda soft paint....and on the radius edges on my truck AL
|
Linear Mode
