[Truels2]

once the polish goes clear should i keep it on speed 6 on the pc or bump it down to like 5?

	PC Porter-Cable Orbital Buffer 7424 or 7336. One of the most famous tool used by a variety of detailers, from weekend warriors to professional detailers.

[911Fanatic]

Originally Posted by Truels2

once the polish goes clear should i keep it on speed 6 on the pc or bump it down to like 5?

Once the polish goes clear it has broken down enough so you're done. With a pc, this could take a few minutes. Just remember with a pc, it will take longer to break the polish down than it would with rotary. Work a small area at a time, say 12x12 or slightly larger. Don't use too much product. Typically I will put 4 pea sized drops on a 5 inch pad to do say half a fender. The stuff goes a long way. If you find that isn't enough, add ONE more drop etc until you get the results you want. Remember, pics...lots of pics.

	PC Porter-Cable Orbital Buffer 7424 or 7336. One of the most famous tool used by a variety of detailers, from weekend warriors to professional detailers.

[Truels2]

Originally Posted by 911Fanatic

Once the polish goes clear it has broken down enough so you're done. With a pc, this could take a few minutes. Just remember with a pc, it will take longer to break the polish down than it would with rotary. Work a small area at a time, say 12x12 or slightly larger. Don't use too much product. Typically I will put 4 pea sized drops on a 5 inch pad to do say half a fender. The stuff goes a long way. If you find that isn't enough, add ONE more drop etc until you get the results you want. Remember, pics...lots of pics.

Thanks for the info. Still waiting for the ups guy to show up.

[Truels2]

Here u go i made a thread on the final results with pics

06 Trailblazer ss Black Finish polish+lsp

Thanks for the help everyone it turned out great.