
![]() |
![]() |
| Show and Shine Are you proud of your detail and would like to share it to the world? This is the place for you to share your hard work, why not share it with your fellow detailers. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
This car is a proof that household products is not good for cars..
"Ajax" + ordinary sponge = not good! Product list: Wash: Tar Remover Chemical Guys Citrus Wash + Gloss Green MF mitt Grit Guard Dehydrator Towel Ez Detail Brush Muc-Off Wheel Cleaner ONR Clay Lube Riccardo Clay Paint: Makita 9227 Brinkmann Sonus SFX-1 Sonus SFX-2 3m black pad Mirka Wool 3m Imperial P2000 3m 3434 Blue Painters Tape Menzerna Powergloss Compound Menzerna SIP Menzerna 106ff Protection: Chemical Guys Jetseal 109 DP Max Wax Inspection after wash and clay: ![]() ![]() ![]() ![]() ![]() ![]() ![]() You don't even need light to see the scratches/swirls.. ![]() ![]() ![]() ![]() ![]() ![]() ![]() Started out with SIP and a Sonus SFX-1 pad.. Still lots of RDS remaining.. ![]() Here is after SIP + Sonus SFX-1, Fast Cut Plus + Wool, 2x Powergloss + wool and 106ff + 3m finishing pad: ![]() ![]() ![]() This car was perfect for me to practice using Powegloss compound! ![]() So here we go.. ![]() ![]() ![]() Left side done: ![]() After this I was tired of re-doing every panel to get rid of RDS.. So I wetsanded the other side: ![]() ![]() ![]() ![]() Started polishing: ![]() Tested with Sonus sfx-2 and 106ff after compounding, this combo did the trick! ![]() ![]() And the rest: ![]() ![]() These panels are NOT wetsanded, they are all swirled up! ![]() ![]() And then the finishing: ![]() ![]() ![]() ![]() Sunlight trough the window! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Car was finished at 2am, so no good after pictures.. No sun ![]() After Jetseal and Max Wax: ![]() ![]() ![]() ![]() ![]() ![]() |
|
|||||
|
Thanks! It's lke a new car now
![]() Quote:
![]() Thanks for the comment Tonya ![]() Thanks! ![]() Quote:
![]() Quote:
![]() Used 3m Imperial p2000 for this one, with ONR qd for lubrication. Would love to have a ptg, like the one you have.. But it cost a fortune.. Had to buy a couple of the black 3m pads after seeing your polishing video.. Along with the 3m backing plate, it works nice! But one problem though.. The pad is so soft, I had a hard time polishing along the edges.. What's your experience with this? Quote:
![]() [quote=kogenx;61768] Quote:
![]() |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
|
All times are GMT -6. The time now is 05:24 PM. |