[shadybreal]

Alright, I know many of you are looking for some help in purchasing foam guns and other accessories for your pressure washers both gas and electric. Your help has arrived. I can get you just about anything you need for both types of pressure washers. I've taken a few pictures and videos of my foam gun set-up to help you guys see the benefit of using the foam gun in your detailing. Prices will vary due to the different attachments needed for the variety of pressure washers. The foamer itself is 100.00 bucks shipped in U.S. The gun I use is 25 shipped and allows you to get in those hard to reach places and let's you stay closer to the car w/o the risk of getting the tip too close to the paint. Here are some pics:

Two foamers: One w/ Meg Hyper and one w/ Chemical Guys Citrus Wash



Gun and foamer:



This a cool item for your guns. It's a swivel that makes using your gun so much easier.




Foam shot:



Thickness adjusting: The foamer has an adjustment knob on top to help control the foam.




Video: Hyper Wash mixed 4oz of soap to 28 of water.




PM me if interested. Paypal only!

Thanks,

Bradley

[Deep Gloss Auto Salon]

I bought one of these from Bradley and he is a top notch guy to deal with.

[JLs Detailing]

Originally Posted by MotorCity

I bought one of these from Bradley and he is a top notch guy to deal with.

I did too and like MotorCity said Bradley is a top notch guy to work with.

[getcha]

Bradley I think I have PMed you about these a few times now. I would always ask what you would do if something went wrong with these and never got a response..


Soo, since you are selling these, what is the plan when one of these is a dud or something goes wrong with them? Its not like we can send them back that easily to the distributor..

[HAN]

is there a way to adapt them to a karcher (cheap Malwart models)?

LMK,

Pete

[shadybreal]

Originally Posted by getcha

Bradley I think I have PMed you about these a few times now. I would always ask what you would do if something went wrong with these and never got a response..




Soo, since you are selling these, what is the plan when one of these is a dud or something goes wrong with them? Its not like we can send them back that easily to the distributor..

Sorry I haven't responsed, but I've used mine for about a year now and haven't had much trouble at all. They can be rebuilt for about 25 bucks if needed. I suggest running water through them after using them for the day. I've dropped mine numerous times and it's keeps foaming. I wash about 5 to 8 vehicles a day about 4 to 5 days a week. If it does crap out on you for some weird reason it can probably be rebuilt. I've had to open mine up and loosen the meshy type thing which helps to create the foam. If you too concerned out the quality you can always buy a cheaper one somewhere else. I'm not trying to make a living off the guns. Just wanted to offer them since I've got a lot of PMs, and DB was cool to allow us to sell this type of stuff.

Originally Posted by HAN

is there a way to adapt them to a karcher (cheap Malwart models)?

LMK,

Pete

Yes I can get it to fit the Karchers, but it's a little added cost to make it work. MotorCity has a Karcher and a foam set-up from me.

[m4gician]

Hey Shades,

I have a challenge for you, my electric pressure washer is a Simoniz Branded electric pressure washer...unless you can find a plug and play WAND only that carries a foamer, I may just have to replace the gun at the hose...



If you can make this work for me with a high foaming gun/foaming wand or lance for under $80 I'd be glad to jump on this any anything else you may have.

[richy]

Originally Posted by m4gician

Hey Shades,

I have a challenge for you, my electric pressure washer is a Simoniz Branded electric pressure washer...unless you can find a plug and play WAND only that carries a foamer, I may just have to replace the gun at the hose...



If you can make this work for me with a high foaming gun/foaming wand or lance for under $80 I'd be glad to jump on this any anything else you may have.

Ive got the same style (and make) machine.

[shadybreal]

Originally Posted by m4gician

Hey Shades,

I have a challenge for you, my electric pressure washer is a Simoniz Branded electric pressure washer...unless you can find a plug and play WAND only that carries a foamer, I may just have to replace the gun at the hose...



If you can make this work for me with a high foaming gun/foaming wand or lance for under $80 I'd be glad to jump on this any anything else you may have.

you would need a whole new setup i think. you can get a new trigger to make the foamer work, but I'm not sure you can attach it w/o a new hose. I'll check for you.

[devast8]

shadybreal, check your PM