Audi S5 in for full correction plus coating- Pinpoint Precision Detail

Francisco Santiago · Aug 23, 2014

Another great customer of mine contacted me in about polishing and coating his car, his beloved car. He takes really good care if his car but since taking a bigger position business worse, he doesn't have the time anymore to wax his car like he used to so he wanted me to correct and coat it for him.

Car was brought in to my detailing bay.

Products used:

Washing/Decon

CarPro SnowFoam
CG Citrus
IronX
NanoSkin Medium Towel
NanoSkin Fine Grade sponges [ smaller panels ]

Wheels/Tires

Sonax Full Effect
Mother's Tire Brush
Tuff Tire Cleaner
Wheel Woolies

Paint

Flex3401
LC CSS Orange, White
Wolfgang Über 3.0
D300
CarPro Reflect
Eraser
CQuartZ
Flyby30
Dlux

Interior

303 Aerospace
Vacuum
CarPro Leather/Fabric coating

Washing and decon.....

After the car was washed and decon I brought the car inside for final decon again to make sure the paint was fully cleaned before any polishing took place.

This paint was tricky. I turned off the light on the bay to fully check the paint under different lights, ( LED, Xenon )

Paint condition before

Water spots

He tried to clean something and made it worse.

Taillights before

I really like this combo and so I used it again.

Wolfgang 3.0 Über mixed with D300 for longer working time.

After Correction and Polishing.

Even under the hood good the same treatment.

Before/After

After all the polishing steps were finalized I used Eraser to removal any oils from the polishing steps to make are the paint was fully ready for coating.

CQuartZ time.

After the car was coated, I pulled the car out for fast curing out in the sun.

All in all the car wasn't that bad at all but being a tricky paint I really needed to take the time to make sure any imperfection was gone before applying the coating. About 22 hours went into the car.

To be continued....[/center]